Manual step-by-step guide to connect with ij.start.cannon
There are many users who look for easy-to-follow guidelines to setup . If you are also a beginner and do not know how to process the steps for the same then this article will help you to setup the canon.com/ijsetup without any interruptions. Here we have explained the setup process for both wired and wireless connection for Windows and Mac operating systems. So, if you do not know the process to setup then let’s get started with the steps to be followed.
What are the basic prerequisites before you establish a connection with canon.com/ijsetup?
You need to always keep handy the model number of the printer before you setup.
Make sure that your device has enough storage capacity.
Ensure that the printer is plugged properly in the power socket.
Make sure that your device has an active internet connection.
How to setup a Canon printer on Windows 10?
Firstly, you have to download and install the printer driver from canon.com/ijsetup.
Now, turn on the Canon printer and make sure that it is properly plugged in with the power switch.
After this, you have to open the downloaded file of driver setup and tap on the next till the time you see the screen to select “Wireless setup”.
Once you have selected the wireless option, you have to go to the Canon printer screen and click on the WiFi setup button.
Tap on the device settings and click on the “OK” button.
In the next screen, choose the device settings option and go to the LAN settings and then click on the “OK” button.
After this, you need to make sure that the wifi router is turned on, now the wifi flash lamp will blink on the printer.
You will now see a network list will appear on-screen.
Just select the wifi network from the list and click on the “OK” button.
It will then ask you to enter the WPA/ WEP key.
Enter the correct password here and click on the “OK” button.
After a while, your printer will get connected to the wifi network.
Hence, by following the steps above you can easily complete the canon.com/ijsetup wireless setup for your Windows.
How to set up a Canon printer on Mac?
To begin with, you have to first download and set up the driver via canon.com/ijsetup and proceed to the next step.
Now, follow the on-screen steps to set up a canon printer on the same wifi network as your device.
In the next step, you have to open the “Apple” menu and tap on the “System Preferences” option.
After this, you have to tap on the printer-shaped icon that is known as “Printers and scanners” from the System preferences window.
On the bottom left corner of the screen, you will be able to see the printer’s name in the left hand and if it already connects over the network or not.
Just tap on it to begin the setup process.
Once the process is completed, your printer will be shown with a Green check and it will be then ready to use.
By the end of this topic, we hope that the set of instructions have helped you with the canon.com/ijsetup process. You can now successfully set up your printer on Windows and Mac devices via ij. start.cannon platform on Windows and Mac devices. However, if you are still stuck between the set of instructions that are provided here, then you are suggested to visit the official website and get professional assistance from the customer support team.